Walk In Tub Models
Click below to view model
Walk-in Tub Features
Many features come standard in the entire line of Private Label Walk-In tub models. These features not only offer convenience but also security, beauty and peace of mind to the bather, whether they’re enjoying a full body bath or shower. Simply scroll down to the corresponding number from the walk-in bathtub image below for a complete description of each feature of these walk-in tubs from the top view and side view.
Top View
1 Faucet
Faucet with Hand Shower is mounted on deck of the tub. The hand shower is mounted using the hand shower cradle allowing the hose to hang inside the tub. NOTE: We don’t recommend the hose go through tub deck as this will allow water to fall behind tub causing damage.
2 Tile Flange
Faucet with Hand Shower is mounted on deck of the tub. The hand shower is mounted using the hand shower cradle allowing the hose to hang inside the tub. NOTE: We don’t recommend the hose go through tub deck as this will allow water to fall behind tub causing damage.
3 Grab Bar
A polished chrome safety grab bar is installed on the back wall allowing the bather stability while maneuvering inside the tub. NOTE: the angled safety bar is only available on 3052, 3155D and 3260D models only. All other models will be straight.
4 Extension Panels
Our extension/filler panels increase the length to a full sixty inches, making it the right size for any standard tub opening.
5 Waste Overflow
The cable operated bath waste & overflow allows the drain to easily open and close with a simple one-eighth turn of the contoured handle.
.
6 Air Jets
Strategically placed are 20 individual air jets around the seat and floor generating thousands of heated air bubbles providing the therapeutic elements necessary for optimal relaxation.
.
7 17-inch Seat Height
The height of the seat is very important in a walk-in bathtub. It’s much easier on the legs sitting down and getting back up if the seat is 17” high. This is why we incorporate this ADA (American Disability Act) standard height in our bathtubs.
.
8 Hydro Jet
There are 5 adjustable/directional jets positioned in the tub. Two on the back, three in the foot well. The pressure is adjusted by rotating the jet face to the left or the right, providing the right amount of pressure needed for the ultimate massage. The water flow can be turned off by adjusting the jet half way.
.
9 Door Latch
A critical feature of the bathtub is the design and location of the Door Latch. Its ergonomically shaped design and strategic placement allows the bather to lower and raise the latch with ease.
.
10 Secondary Door Drain
Water that may leak around the door seal will be captured in the Secondary Drain. This water will then be directed to the bath drain.
.
10 Secondary Door Drain
Water that may leak around the door seal will be captured in the Secondary Drain. This water will then be directed to the bath drain.
.
11 Access Panels
Multi-purpose flush access panels are standard on all tubs. These panels allow the installer the necessary access while setting the tub, while also providing access for servicing the equipment.
.
Side View
1 Door Latch
A critical feature of the bathtub is the design and location of the Door Latch. Its ergonomically shaped design and strategic placement allows the bather to lower and raise the latch with ease.
.
2 One Piece Construction
This process ensures there are no weak points or fatigue around the tub especially the door frame area, greatly reducing any chance of leakage from the door seal.
.
Syllent Pump
Always looking to improve our systems we were the first to incorporate the Syllent pump technology. Syllent’s whisper quiet operation and the ability to maintain water temperature as it cools the motor are a plus as well as being energy efficient.
.
4 Blower
Our variable speed heated air blower provides a powerful stream of air while the muffler significantly reduces the sound of the motor. Important; the built in heating element will provide warm air bubbles however the air will not feel warm while bathing nor will they heat the water.
.
5 Motor Platform
Provided is a motor platform integrated onto the tub frame housing the pump and or blower. This platform allows for easy access to the motor mounts if replacement is needed.
.
6 Leveling Feet
Six adjustable feet with rubber bases are provided for leveling, as well provide a sturdy foundation for the tub.
.
7 Frame Construction
Providing a frame that will stand the test of time. We incorporate two types of frames, stainless steel as well as powder coated steel.
.